OptionsEmulex Certified Spare Optic Kit for LightPulse 8Gb/s Fibre Channel HBAsQTY 1, 8Gb/s short wave lasers with LC-type connecter SFP+ opticCompatible with all Emulex LightPulse 8Gb/s Fibre Channel Host Bus AdaptersFor use as an on-site spare opticPart number LPe12100-OPTStandardsANSI Fibre Channel: FC-PI-4, FC-FS-2, FC-FS-2/AM1, FC-LS, FC-AL-2, FC-GS-6, FC-FLA, FC-PLDA, FC-TAPE, FC-DA, FCP through FCP-4, SBC-3, FC-SP, FC-HBA and SMI-S v1.1PCI Express base spec 2.0PCI Express card electromechanical spec 2.0Fibre Channel class 2 and 3PHP hot plug-hot swapArchitectureQuad-channel8Gb/s, 4Gb/s or 2Gb/s FC Link speeds automatically detectedIntegrated data buffer and code space memoryComprehensive OS SupportWindows, Linux, NetWare, Solaris (except DR), VMwareAdditional support is available from OEMs and partnersHardware EnvironmentsPowerPC,® SPARC,® x86, x64 and Intel® Itanium® 64-bit processor familyOpticalData rates: 2.125, 4.25 and 8.5Gb/s (auto-detected)Optics: Short wave lasers with LC type connectorCable: Operating at 8Gb/s50/125 microns (500MHz*km BW)-up to 50m50/125 microns (2000MHz*km BW)-up to 150mPhysical DimensionsPCI full-height, half-length form factor card111.55mm x 167.64mm (4.376" x 6.600")Standard bracketPower & Environmental RequirementsVolts: +3.3, +12Operating temperature: 0° to 55°C (32° to 131°F)Storage temperature: -40° to 70°C (-40° to 158°F)Relative humidity: 5% to 95% non-condensing23 degree C wet bulbAgency ApprovalsClass 1 Laser Product per DHHS 21CFR (J) and EN60825-1UL recognized to UL 60950-1CUR recognized to CSA22.2, No. 60950-1-03Baurt-certified to EN60950-1FCC Rules, Part 15, Class AICES-003, Class AEMC Directive 2004/108/EEC (CE Mark)EN55022, Class AEN55024Australian EMC Framework (C-Tick Mark)AS/NZS CISPR22, Class AVCCI (Japan), Class AMIC (Korea), Class ABSMI (Taiwan), Class AEU RoHS Compliant (Directive 2002/95/EC)China RoHS CompliantAdditional Features Performance FeaturesDoubling the maximum Fibre Channel link rate from 4Gb/s to 8Gb/s and enhanced virtualization capabilities help support IT “Green” initiativesFrame-level Multiplexing and out-of-order frame reassembly increases link efficiency and maximizes HBA performance.Data Protection FeaturesEnd-to-end data protection with hardware parity, CRC, ECC and other advanced error checking and correcting algorithms ensure data is safe from corruption.Deployment and Management FeaturesUniversal Boot capability allows the appropriate boot environment to be automatically selected for any given hardware.Boot from SAN capability reduces system management costs and increases uptime.Detailed real-time event logging and tracing enables quick diagnosis of SAN problems.Beaconing feature flashes the HBA LEDs, simplifying their identification within server racks.Environmental monitoring feature helps to optimize SAN availability.