Emulex LP1050Ex-F2 The LightPulse™ LP1050EX-F2 Fiber Channel PCI Express Host Bus Adapter from Emulex® offers an integrated 2 Gbps Fiber Channel to PCI/PCI-X connectivity solution for both enterprise and midrange–class Storage Area Networks (SANs). It features 'Thor', a Fiber Channel controller, and leverages the power of Service Level Interface (SLI) driver architecture and HBAnyware™, a centralized HBA management suite. This single-channel HBA delivers data transfer rates of up to 2 Gbps via its embedded multi-mode optic interface. The incorporated MultiPulse™ technology provides failover and dynamic load balancing capabilities for enhanced SAN reliability, performance and resource utilization across heterogeneous SANs. Технические характеристики Form Factor Standard Height, Half Length Height 11.1 cm Depth 16.8 cm Compliant Standards CE, FCC Class A certified, TUV, C-Tick, BSMI CNS 13438 Class A, DHHS, EN 60950, ICES-003, UL 1950, VCCI Class A ITE, EN55024, CSA 22.2 No. 950, EN55022 Class A Class 1 Laser, EN60825, UL recognized to UL 60950-1, CUR recognized to CSA22.2, TUV certified to EN60950, FCC rules, Part 15, Class A, ICES–003, Class A, EMC Directive 89/336/EEC (CE Mark), EN55022, Class A, EN55024, VCCI, Class A Connectivity Technology Cable Wired Data Link Protocol Fibre Channel Data Transfer Rate 2.12 Gbps Device Type Host Bus Adapter Device Type Network adapter Dimensions (WxDxH) 16.8 cm x 11.1 cm Interface Type PCIe Power 15.7/22.3 Watts (typical/max) Processor x86 / Intel® Itanium® Novell NetWare, Linux, Microsoft Windows 2000, Microsoft Windows Server 2003 Cabling Type x4 PCIe Fiber optic OS Required Emulex LightPulse LP1050EX-F2 - network adapter Novell NetWare, Linux, Microsoft Windows 2000, Microsoft Windows Server 2003 Interfaces 1 x network - Fibre Channel - LC multi-mode x 2 1 x PCI Express x4 - half-length, full-height Interface (Bus) Type Fibre Channel PCI Express x4 FC-AL, FC-FLA, FC-FS, FC-MI, FC-PH, FC-PI, FC-PLDA, FCP, FCP-2